Open Source KiteSurf Foil

This kite has never been made but I think it should fly ok, especially with a variable AoA bridle . At the moment I am still building my LEI sled so haven't had time to try this kite.

Some points to note:

• I used Will's center profile from his 5.5 williwing, this has some reflex. Is this a good profile? Does it have enough reflex?
• Profile depth?
• The center 8 cells are identical, so they could be made from a single top skin, and another bottom skin. These would require some little 'wedges' in the material to give the cells their shape. Should reduce the number of templates needed.
• Tow point?
• Aspect ratio?
• DePower bridle?
• Arc like valves for inflation.

Please download and play with the settings :-)

Right click on the link and 'save as...' kitesurf foil.